RTG offers a wide range of different hammers for its base carriers. Both hydraulic and diesel hammers of distinct sizes can be used. The optimally adjusted height of the hydraulic hammers allows long driving material to be inserted at low mast length. The required hydraulic energy and the control technique for the hammers are provided by the base carrier. Independent from the material, which has to be driven, all necessary adaptation facilities can be delivered and applied. By means of the data recording system it is possible to record the data, relevant for the production. The system is recording the installation depth, the current driving power, the frequency of the hammer blows and the applied energy for the installation of the pile. Based on the recorded data an installation record can be generated for each pile.